Magigoo PRO HT (50ml) - 3D Printing Adhesive
Magigoo Pro HT (50ml) – High‑temperature filament adhesion
Magigoo Pro HT is a specialised first‑layer adhesive developed for high‑temperature FDM materials that are prone to warping. It is intended for elevated build‑plate temperatures used for materials like PEEK and PEKK.
Key benefits
- Developed for high‑temperature filaments with strong warping tendencies.
- Specialised solution for printing at elevated bed temperatures (tested for high-temperature workflows).
- Water‑based cleaning after use.
How to use
- Apply on a clean build surface (ideally on a cool bed).
- Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
- Spread an even, thin coat over the active print area—make sure no spots are missed.
- Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
Print tips
- High‑temp materials benefit from controlled environments (enclosure/heated chamber, stable temps).
- A second application over a dried first layer can help for large, challenging prints.
Cleanup
Wipe with water and a cloth once the bed is cool.
Safety & handling
- Apply on a cool, cleaned bed; keep the applicator tip clean.
What’s included
- 1 × Magigoo Pro HT pen bottle
Magigoo Pro HT (50ml) – High‑temperature filament adhesion
Magigoo Pro HT is a specialised first‑layer adhesive developed for high‑temperature FDM materials that are prone to warping. It is intended for elevated build‑plate temperatures used for materials like PEEK and PEKK.
Key benefits
- Developed for high‑temperature filaments with strong warping tendencies.
- Specialised solution for printing at elevated bed temperatures (tested for high-temperature workflows).
- Water‑based cleaning after use.
How to use
- Apply on a clean build surface (ideally on a cool bed).
- Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
- Spread an even, thin coat over the active print area—make sure no spots are missed.
- Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
Print tips
- High‑temp materials benefit from controlled environments (enclosure/heated chamber, stable temps).
- A second application over a dried first layer can help for large, challenging prints.
Cleanup
Wipe with water and a cloth once the bed is cool.
Safety & handling
- Apply on a cool, cleaned bed; keep the applicator tip clean.
What’s included
- 1 × Magigoo Pro HT pen bottle
Original: $44.64
-65%$44.64
$15.62Description
Magigoo Pro HT (50ml) – High‑temperature filament adhesion
Magigoo Pro HT is a specialised first‑layer adhesive developed for high‑temperature FDM materials that are prone to warping. It is intended for elevated build‑plate temperatures used for materials like PEEK and PEKK.
Key benefits
- Developed for high‑temperature filaments with strong warping tendencies.
- Specialised solution for printing at elevated bed temperatures (tested for high-temperature workflows).
- Water‑based cleaning after use.
How to use
- Apply on a clean build surface (ideally on a cool bed).
- Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
- Spread an even, thin coat over the active print area—make sure no spots are missed.
- Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
Print tips
- High‑temp materials benefit from controlled environments (enclosure/heated chamber, stable temps).
- A second application over a dried first layer can help for large, challenging prints.
Cleanup
Wipe with water and a cloth once the bed is cool.
Safety & handling
- Apply on a cool, cleaned bed; keep the applicator tip clean.
What’s included
- 1 × Magigoo Pro HT pen bottle
