310mm x 320mm Flexible Smooth/Textured PEI Spring Steel Surface with Magnet
310mm x 320mm Flexible Smooth/Textured PEI Spring Steel Surface with Magnet
This product contains:
- 1 flexible double-sided build surface: one side is a textured PEI surface and the side is a smooth PEI surface.
- 1 magnetic base
The Flexible Double-sided PEI Spring Steel Surface is 0.2 mm thick and the magnetic base is 1.5mm thick. It works great with PLA, TPU, PETG, as well as many other filaments. It is recommendable to print PETG on textured side and PLA on smooth side. If you required more adhesion, apply purple glue stick and gently wash the build surface with water after printing. Use isopropyl alcohol to clean after each use to keep contaminants away.
*Please make sure to measure your bed before making your purchase. Remember to peel off the protective layer from the smooth PEI side before printing.*
310mm x 320mm Flexible Smooth/Textured PEI Spring Steel Surface with Magnet
This product contains:
- 1 flexible double-sided build surface: one side is a textured PEI surface and the side is a smooth PEI surface.
- 1 magnetic base
The Flexible Double-sided PEI Spring Steel Surface is 0.2 mm thick and the magnetic base is 1.5mm thick. It works great with PLA, TPU, PETG, as well as many other filaments. It is recommendable to print PETG on textured side and PLA on smooth side. If you required more adhesion, apply purple glue stick and gently wash the build surface with water after printing. Use isopropyl alcohol to clean after each use to keep contaminants away.
*Please make sure to measure your bed before making your purchase. Remember to peel off the protective layer from the smooth PEI side before printing.*
Original: $69.17
-65%$69.17
$24.21Description
310mm x 320mm Flexible Smooth/Textured PEI Spring Steel Surface with Magnet
This product contains:
- 1 flexible double-sided build surface: one side is a textured PEI surface and the side is a smooth PEI surface.
- 1 magnetic base
The Flexible Double-sided PEI Spring Steel Surface is 0.2 mm thick and the magnetic base is 1.5mm thick. It works great with PLA, TPU, PETG, as well as many other filaments. It is recommendable to print PETG on textured side and PLA on smooth side. If you required more adhesion, apply purple glue stick and gently wash the build surface with water after printing. Use isopropyl alcohol to clean after each use to keep contaminants away.
*Please make sure to measure your bed before making your purchase. Remember to peel off the protective layer from the smooth PEI side before printing.*
